Screw Pump Manufacturer in Tamil Nadu

What is a Progressive Cavity Screw Pump?

A progressive cavity pump (also called a single-screw or eccentric screw pump) is a positive displacement pump that moves fluid through sealed cavities formed between a helical rotor and a stator. This creates stable, low-pulsation flow, making it ideal for:

• Shear-sensitive fluids
• Viscous products
• Slurries and abrasive media
• Metered dosing and accurate transfer

How it Works

As the rotor turns inside the elastomer stator, cavities "progress" from suction to discharge. The result is:

• Predictable flow (good for dosing/feeding)
• High suction capability for difficult fluids
• Gentle pumping action (reduced product damage)

Performance Range & Model Overview

We provide the following specifications:

• Single stage: up to 6 kg/cm² (max)
• Double stage: up to 12 kg/cm² (max)
• Four stage: up to 24 kg/cm² (max)

Important sizing note: The brochure data is referenced to water at ambient conditions; RPM and absorbed power vary with actual viscosity of the pumped media.

View complete table from PDF: Download

Materials of Construction

• Housing / wetted parts options: Cast iron, cast steel, CF8 (AISI 304), CF8M (AISI 316), AISI 316L, with fabrication/finishes available for food-grade requirements.
• Rotating parts: rotor/shafts/coupling rods in SS304/SS316/SS316L, alloy steels, and other alloys (as per application).
• Shaft sealing: gland packing or mechanical seals.
• Stator elastomers (selection as per chemical + temperature): Natural rubber, Nitrile, EPDM, Hypalon, Neoprene, Viton, Silicone + food-grade options, typically 60–70 Shore A.

Where These Pumps Are Used

Common applications

• Filter press feed, sludge transfer, thickened slurry handling
• Polymer dosing and chemical dosing (consistent metered flow)
• Effluent treatment plants (ETP/STP), waste handling
• Paints, inks, resins, adhesives (high viscosity)
• Food & beverage viscous transfer (syrups, sauces, concentrates)
• Mining/mineral slurries and abrasive media transfer

Why progressive cavity pumps here?

Progressive cavity pumps handle high viscosity + solids with controlled flow better than many centrifugal setups.

Optional Accessories

Dry running protection: monitors stator temperature (thermoelectric sensing) and trips the motor if dry-running causes overheating—helps prevent stator damage.

Pressure relief valve: recommended when the pump may run against a closed valve or line blockage, improves plant safety.

How to Select the Right Screw Pump

To recommend the correct pump model, please share:

• Media name + concentration + pH/chemistry
• Viscosity range (cP) + temperature
• Solids % / particle size / abrasiveness
• Required flow rate (m³/hr or LPH)
• Required discharge pressure / head
• Duty cycle and installation details (flooded suction, suction lift, piping)

*If you want us to guide you, we can help. Please contact us below

Why Verito Engineering

• ISO 9001:2015 certified
• Manufacturing and engineering support across India and abroad
• Custom material/elastomer selection for corrosive, abrasive, or food-grade requirements

Serviceable Areas in Tamil Nadu

Ambattur SIDCO Industrial Estate; Thiru-Vi-Ka (Guindy) Industrial Estate	SIPCOT Vallam Vadagal Industrial Park & Aerospace Park	Industrial corridor (legacy SIPCOT); North Chennai industrial belt
Mahindra World City	SIDCO Kappalur Industrial Estate	SIDCO Kurichi & Malumichampatti estates
SIDCO Mudalipalayam; Rasathavalasu; TEKIC knitwear cluster	SIDCO Thuvakudi Industrial Estate	SIPCOT Bargur Industrial Park & SEZ
SIPCOT Cuddalore Industrial Park	SIPCOT Eraiyur Industrial Park	SIPCOT Gangaikondan Industrial Growth Centre & SEZ
SIPCOT Hosur Industrial Parks (Phases)	SIPCOT Irungattukottai Industrial Park	SIPCOT Kurubarapalli Industrial Park
SIPCOT land banks & industrial nodes	SIPCOT Manallur Industrial Park	SIPCOT Manamadurai Industrial Park
SIPCOT Nemili Industrial Park	SIPCOT Nilakottai Industrial Park	SIPCOT Oragadam Industrial Park
SIPCOT Perundurai Industrial Park & SEZ	SIPCOT Pillaipakkam Industrial Park	SIPCOT Ranipet Industrial Park & SEZ
SIPCOT Shoolagiri Industrial Park	SIPCOT Siruseri IT Park	SIPCOT Sriperumbudur Industrial Park & SEZ
SIPCOT Thirumudivakkam Industrial Park; SIDCO Thirumudivakkam Industrial Estate	SIPCOT Thoothukudi Industrial Park	SIPCOT Tindivanam

Tamil Nadu's industrial base is spread across multiple high-density manufacturing belts, supported by SIPCOT's network of industrial parks and SEZs across the state. Around Chennai, major SIPCOT parks such as Sriperumbudur, Oragadam, and Irungattukottai serve large automotive, engineering, and electronics supply chains, and the state also recognizes established automotive clusters in Sriperumbudur, Oragadam, and Maraimalai Nagar. This broader growth is reinforced by planned connectivity and industrial agglomeration under the Chennai–Bengaluru Industrial Corridor.

For process and heavy-industry applications, Tamil Nadu includes strong nodes that benefit from reliable dosing and solids-handling pumping. North Chennai hosts the CPCL Manali Refinery, a major integrated refinery and petrochemical feedstock producer. In western Tamil Nadu, Coimbatore is a well-known engineering and pump-manufacturing center with many established pump makers and allied industries. Along the coast, the Thoothukudi industrial region benefits from proximity to the V.O. Chidambaranar Port Authority, supporting import-export movement for industries operating in and around SIPCOT areas.

Providing the best screw pumps in Tamil Nadu is our mission and serving industrial sectors here with quality products is our privilege.

FAQs

What is the difference between a screw pump and a progressive cavity pump?

Progressive cavity pumps are commonly called single-screw/eccentric screw pumps; multi-screw pumps (twin/triple) are a different design used often for lubricating liquids

Can your pump handle abrasive slurry or sludge?

Yes, Progressive Cavity pumps are widely used for slurry/sludge; material and stator selection are critical for wear life.

What stator materials do you offer?

Natural rubber, NBR, EPDM, Viton, Silicone and food-grade options (selection depends on chemical/temperature).

Do you offer mechanical seals?

Yes, mechanical seals or gland packing options are available.

How do I prevent dry running damage?

Use dry running protection (temperature sensing/trip) and proper instrumentation.

Do performance values change with viscosity?

Yes, RPM and absorbed power depend on actual viscosity.