Screw Pump Manufacturer in Odisha

What is a Progressive Cavity Screw Pump?

A progressive cavity pump (also called a single-screw or eccentric screw pump) is a positive displacement pump that moves fluid through sealed cavities formed between a helical rotor and a stator. This creates stable, low-pulsation flow, making it ideal for:

• Shear-sensitive fluids
• Viscous products
• Slurries and abrasive media
• Metered dosing and accurate transfer

How it Works

As the rotor turns inside the elastomer stator, cavities "progress" from suction to discharge. The result is:

• Predictable flow (good for dosing/feeding)
• High suction capability for difficult fluids
• Gentle pumping action (reduced product damage)

Performance Range & Model Overview

We provide the following specifications:

• Single stage: up to 6 kg/cm² (max)
• Double stage: up to 12 kg/cm² (max)
• Four stage: up to 24 kg/cm² (max)

Important sizing note: The brochure data is referenced to water at ambient conditions; RPM and absorbed power vary with actual viscosity of the pumped media.

View complete table from PDF: Download

Materials of Construction

• Housing / wetted parts options: Cast iron, cast steel, CF8 (AISI 304), CF8M (AISI 316), AISI 316L, with fabrication/finishes available for food-grade requirements.
• Rotating parts: rotor/shafts/coupling rods in SS304/SS316/SS316L, alloy steels, and other alloys (as per application).
• Shaft sealing: gland packing or mechanical seals.
• Stator elastomers (selection as per chemical + temperature): Natural rubber, Nitrile, EPDM, Hypalon, Neoprene, Viton, Silicone + food-grade options, typically 60–70 Shore A.

Where These Pumps Are Used

Common applications

• Filter press feed, sludge transfer, thickened slurry handling
• Polymer dosing and chemical dosing (consistent metered flow)
• Effluent treatment plants (ETP/STP), waste handling
• Paints, inks, resins, adhesives (high viscosity)
• Food & beverage viscous transfer (syrups, sauces, concentrates)
• Mining/mineral slurries and abrasive media transfer

Why progressive cavity pumps here?

Progressive cavity pumps handle high viscosity + solids with controlled flow better than many centrifugal setups.

Optional Accessories

Dry running protection: monitors stator temperature (thermoelectric sensing) and trips the motor if dry-running causes overheating—helps prevent stator damage.

Pressure relief valve: recommended when the pump may run against a closed valve or line blockage, improves plant safety.

How to Select the Right Screw Pump

To recommend the correct pump model, please share:

• Media name + concentration + pH/chemistry
• Viscosity range (cP) + temperature
• Solids % / particle size / abrasiveness
• Required flow rate (m³/hr or LPH)
• Required discharge pressure / head
• Duty cycle and installation details (flooded suction, suction lift, piping)

*If you want us to guide you, we can help. Please contact us below

Why Verito Engineering

• ISO 9001:2015 certified
• Manufacturing and engineering support across India and abroad
• Custom material/elastomer selection for corrosive, abrasive, or food-grade requirements

Serviceable Areas in Telangana

Paradip (Jagatsinghpur)	Jajpur (Kalinganagar)	Rourkela
Jharsuguda	Angul / Talcher (Dhenkanal–Angul belt)	Gopalpur (Ganjam)
Khurda / Bhubaneswar	Cuttack / Choudwar	Balasore / Bhadrak (Dhamra)
Sambalpur / Hirakud	Rayagada / Jeypore / Sunabeda	Keonjhar

Odisha's industrial base is shaped by mineral-led heavy industry and port-linked process manufacturing, with industrial land and estates developed across the state by IDCO, the Government of Odisha's infrastructure arm. A key manufacturing concentration is the Kalinganagar industrial region in Jajpur, which hosts large integrated steel operations such as Tata Steel's Kalinganagar plant, creating strong demand for reliable pumping in utilities, slurry movement, and waste handling. On the coast, Paradip functions as a major logistics and process node through the Paradip Port Authority and IndianOil's Paradip Refinery (commissioned in 2016), supporting continuous operations that require dependable dosing and transfer of viscous and solids-laden fluids. Inland, the Angul–Talcher belt anchors aluminium and power-linked industries, including NALCO's aluminium smelter and captive power plant at Angul, where abrasive slurries, effluent, and sludge handling are common plant realities. Across these hubs, progressive cavity screw pumps are a strong fit for chemical dosing, slurry transfer, filter-press feeding, and sludge handling, especially where consistent flow and gentle product handling help stabilize operations.

Providing the best screw pumps in Odisha is our mission and serving industrial sectors here with quality products is our privilege.

FAQs

What is the difference between a screw pump and a progressive cavity pump?

Progressive cavity pumps are commonly called single-screw/eccentric screw pumps; multi-screw pumps (twin/triple) are a different design used often for lubricating liquids

Can your pump handle abrasive slurry or sludge?

Yes, Progressive Cavity pumps are widely used for slurry/sludge; material and stator selection are critical for wear life.

What stator materials do you offer?

Natural rubber, NBR, EPDM, Viton, Silicone and food-grade options (selection depends on chemical/temperature).

Do you offer mechanical seals?

Yes, mechanical seals or gland packing options are available.

How do I prevent dry running damage?

Use dry running protection (temperature sensing/trip) and proper instrumentation.

Do performance values change with viscosity?

Yes, RPM and absorbed power depend on actual viscosity.