Screw Pump Manufacturer in Gujarat

What is a Progressive Cavity Screw Pump?

A progressive cavity pump (also called a single-screw or eccentric screw pump) is a positive displacement pump that moves fluid through sealed cavities formed between a helical rotor and a stator. This creates stable, low-pulsation flow, making it ideal for:

• Shear-sensitive fluids
• Viscous products
• Slurries and abrasive media
• Metered dosing and accurate transfer

How it Works

As the rotor turns inside the elastomer stator, cavities "progress" from suction to discharge. The result is:

• Predictable flow (good for dosing/feeding)
• High suction capability for difficult fluids
• Gentle pumping action (reduced product damage)

Performance Range & Model Overview

We provide the following specifications:

• Single stage: up to 6 kg/cm² (max)
• Double stage: up to 12 kg/cm² (max)
• Four stage: up to 24 kg/cm² (max)

Important sizing note: The brochure data is referenced to water at ambient conditions; RPM and absorbed power vary with actual viscosity of the pumped media.

View complete table from PDF: Download

Materials of Construction

• Housing / wetted parts options: Cast iron, cast steel, CF8 (AISI 304), CF8M (AISI 316), AISI 316L, with fabrication/finishes available for food-grade requirements.
• Rotating parts: rotor/shafts/coupling rods in SS304/SS316/SS316L, alloy steels, and other alloys (as per application).
• Shaft sealing: gland packing or mechanical seals.
• Stator elastomers (selection as per chemical + temperature): Natural rubber, Nitrile, EPDM, Hypalon, Neoprene, Viton, Silicone + food-grade options, typically 60–70 Shore A.

Where These Pumps Are Used

Common applications

• Filter press feed, sludge transfer, thickened slurry handling
• Polymer dosing and chemical dosing (consistent metered flow)
• Effluent treatment plants (ETP/STP), waste handling
• Paints, inks, resins, adhesives (high viscosity)
• Food & beverage viscous transfer (syrups, sauces, concentrates)
• Mining/mineral slurries and abrasive media transfer

Why progressive cavity pumps here? They handle high viscosity + solids with controlled flow better than many centrifugal setups.

Optional Accessories

Dry running protection: monitors stator temperature (thermoelectric sensing) and trips the motor if dry-running causes overheating—helps prevent stator damage.

Pressure relief valve: monitors stator temperature (thermoelectric sensing) and trips the motor if dry-running causes overheating—helps prevent stator damage.

How to Select the Right Screw Pump

To recommend the correct pump model, please share:

• Media name + concentration + pH/chemistry
• Viscosity range (cP) + temperature
• Solids % / particle size / abrasiveness
• Required flow rate (m³/hr or LPH)
• Required discharge pressure / head
• Duty cycle and installation details (flooded suction, suction lift, piping)

*If you want us to guide you, we can help. Please contact us below

Why Verito Engineering

• ISO 9001:2015 certified
• Screw Pump Manufacturing and engineering support from Ahmedabad, Gujarat
• Custom material/elastomer selection for corrosive, abrasive, or food-grade requirements

Serviceable Areas in Gujarat

Naroda, Odhav, Vatva, Kathwada, Behrampura, Apparel Park (Ambica Mill)	Sanand GIDC Industrial Estate	Changodar Industrial Area
Kerala GIDC, Bavla Industrial Area	Dholka GIDC	Dhandhuka GIDC
Chharodi (Ahmedabad)	Mandal GIDC, Becharaji auto hub (MBSIR)	Kalol (NG) GIDC
Chhatral GIDC Industrial Estate	Makarpura GIDC	Nandesari GIDC (chemical)
Savli (General), Savli (EPIP), Savli Biotech Park (SEZ)	Waghodia GIDC	Ranoli GIDC
Por-Ramangamdi GIDC	Dabhoi GIDC	Dahej PCPIR, Dahej SEZ, Dahej GIDC
Ankleshwar GIDC	Panoli GIDC	Jhagadia GIDC
Vilayat GIDC	Palej GIDC, Valia GIDC, Saykha GIDC, Vagra	Udhna, Pandesara, Sachin GIDC, Ichhapore, Hazira
Vapi Industrial Estate (GIDC)	Sarigam GIDC, Umbergaon GIDC	Pardi GIDC
Navsari GIDC, Bilimora	Aji GIDC, Shapar–Veraval (Lodhika/Metoda), Kuvadva, Gondal Rd industrial areas	Dared GIDC (Shankar Tekri), Jamnagar I/II/III
Chitra GIDC, Sihor GIDC	Morbi Ceramic Cluster, Wankaner GIDC, Thangadh (sanitaryware)	Jetpur (textile), Porbandar GIDC, Veraval
Mehsana I & II, Kadi GIDC, Visnagar GIDC, Ranasan GIDC	Chhatral GIDC, Kalol (NG), Mansa, Dehgam	Himatnagar GIDC, Idar, Talod
Deesa GIDC, Palanpur (Chandisar), Shihori	Siddhpur, Radhanpur	Gandhidham GIDC, Kandla port-linked zone
Mundra (RIDC/SEZ vicinity)	Anjar GIDC, Mithi Rohar GIDC	Bhuj GIDC, Nakhatrana, Rafaleshwar (Rapar)
Vitthal Udyognagar (V.U. Nagar) Industrial Estate	Nadiad I & II, Sojitra, Matar	Halol GIDC, Godhra GIDC
Dahod I & II	GIFT State (IFSC & SEZ)

Gujarat's industrial landscape includes dense process-industry corridors that routinely need reliable dosing and solids-handling equipment. This includes the Ankleshwar chemical cluster in Bharuch, a major concentration of chemical manufacturing in the state, and the Vapi chemical cluster in Valsad with hundreds of chemical units spread across multiple phases of its industrial area. The state also hosts the Dahej PCPIR in Bharuch, a nationally designated petroleum, chemicals and petrochemicals investment region, along with port-linked industrial zones such as Hazira near Surat, known for its LNG-led multi-cargo port infrastructure.

Beyond chemicals, Gujarat features large energy and manufacturing hubs where progressive cavity screw pumps are commonly selected for slurry transfer, sludge handling, filter-press feeding, and precise chemical dosing. This includes the Jamnagar refining complex, supported by marine logistics infrastructure, and the Sanand industrial estate near Ahmedabad, developed as an automobile and engineering hub. Across these GIDC-supported industrial estates and sector-focused regions, Verito Engineering's progressive cavity screw pumps fit demanding applications that require stable flow, accurate metering, and gentle product handling.

Providing the best screw pumps in Gujarat is our mission and serving industrial sectors here with quality products is our privilege.

FAQs

What is the difference between a screw pump and a progressive cavity pump?

Progressive cavity pumps are commonly called single-screw/eccentric screw pumps; multi-screw pumps (twin/triple) are a different design used often for lubricating liquids

Can your pump handle abrasive slurry or sludge?

Yes, Progressive Cavity pumps are widely used for slurry/sludge; material and stator selection are critical for wear life.

What stator materials do you offer?

Natural rubber, NBR, EPDM, Viton, Silicone and food-grade options (selection depends on chemical/temperature).

Do you offer mechanical seals?

Yes, mechanical seals or gland packing options are available.

How do I prevent dry running damage?

Use dry running protection (temperature sensing/trip) and proper instrumentation.

Do performance values change with viscosity?

Yes, RPM and absorbed power depend on actual viscosity.